Thermal Loss Thwarted

Thermal Loss Thwarted

Originally printed in Architectural Products Magazine, Features Special Report, Insulation, Nov 2013

By:  Alan Weis, Contributing Writer

INSULATION- APPLIED AND INSTALLED PROPERLY- CAN BE AN INTEGRAL MEASURE IN CREATING AN EFFECTIVE AND EFFICIENT ENVELOPE.

FULL article (pdf)

Architectural Products, Nov 2013

Architectural Products, Nov 2013

When it comes to insulation, R-value- the measure of thermal resistance – seemingly rules.  In other words, the higher the R-value the better the thermal resistance.  But there’s more to the story than that according to industry experts.  “An insulation product’s R-value is only a starting point for understanding how well it works, says James Hodgson, general manager for Premier SIPS.

In fact, Hodgson says it’s crucial to evaluate the whole-wall R-value of the assembly, since the insulation is only one part of creating a tight, well-insulated envelope.  For example, he claims DOE research shows that a 4.5-in. structural insulation panel (SIP) wall rated at R-14, out-performs a 2×6 stud wall with R-19 fiberglass insulation.  “It comes down to significantly less air leakage, thermal bridging and convective looping for a better performing assembly,” says Hodgson.

Insulation, unfortunately, is too often treated as an afterthought, as Hodgson says it ends up getting fit around the structural systems instead of being an integral part of them, making it difficult to seal leaks.  SIPs, he notes, address this by incorporating both in one assembly.

NOW VS. LATER

Longevity is another consideration when it comes to R-values.  “It’s common for building professionals to look at R-value per inch at the time of installation, “says Ram Mayilvahanan, product marketing manager with Insulfoam.  “Yet, it makes more sense to evaluate insulation’s long-term thermal performance and the return on investment.”

R-tech

Insulfoam EPS insulation not only offers a high initial R-value, it also doesn’t lose R-value with time.

His company manufactures HD composite roof insulation, which bonds expanded polystyrene (EPS) foam to a high-density polyiso cover board, a combination that has high thermal efficiency and provides significant field labor savings.  Plus, Mayilvahanan says it can be used to achieve UL Class A fire ratings on combustible roof decks without the use of gypsum or other cover boards.

“Many rigid foam insulations experience thermal drift, which is a loss of R-value over time as insulating gases within them dissipate and are replaced by air,” Mayilvahanan continues.  “Some materials lose up to 20% of their insulating capacity during their time in service.”  One the other hand, EPS insulation, he explains, not only offers a high initial R-value, it also doesn’t lose R-value with time.  And, it can be used in wall, roof, below-grade and under-slab applications.

Continue to read FULL article (pdf) where further insulation consideration and types are described by industry experts.

“The push toward comprehensive green design has raised awareness that many building systems must work together for optimum performance,” says Mayilvahanan.  “It’s not just insulating the structure appropriately, but also right-sizing the HVAC systems and educating owners and occupants on how to operate the building for high energy efficiency.”

 

More info on Insulfoam:  Website  |  Read blog articles  |  Follow on LinkedIn

More info on Premier SIPs by Insulfoam:   Website  |  Read blog articles  |  Follow on LinkedIn

 

0 Comments

Leave a reply

Your email address will not be published. Required fields are marked *

*