Project Profile: Target Retail Store Saves 25% Cost Savings in Insulation with EPS

Project Profile: Target Retail Store Saves 25% Cost Savings in Insulation with EPS

Target Retail Store Saves 25% Cost Savings in Insulation with EPS |  King of Prussia, PA 

R-Tech Below Grade provided 25% cost savings in insulation on the project without sacrificing performance.

Download the Case Study PDF

November 7 2013 018

The Target store located in King of Prussia, PA was constructed different than most and was not built as a slab on grade.  The bottom level of the building is a parking garage while the retail space is located on the second level.  Target used InsulGrade R-Tech as a between slab insulation as a way of insulating the floor of the retail space and providing a thermal barrier between the concrete planks and the floor slab.

DOW XPS was initially specified on the Target project, however; R-Tech was substituted and provided a substantial cost savings while providing both long-term stable and non-degrading R-Value.

PROBLEM & SOLUTION

Space was a challenge for this Target project as the parking garage is on the ground level and the actual retail floor is on the second level.  Concrete planks were installed as the base substrate.  R-Tech was then installed over the plank to insulate the interior of the retail space from the open parking garage underneath.  A topping slab was then poured over the R-Tech to create the retail floor.  The R-Tech insulation has a long-term stable R-Value and is eligible for an Insulfoam 20-Year Thermal Performance Warranty … a warranty that’s not prorated or limited to a percentage of the published R-Value.

InsulGrade R-Tech features a premium factory-applied laminate polymeric facer that is virtually impervious to moisture, keeps water from entering the insulation, and away from concrete foundations and slabs.  Available in 4′ x 8′ panels and thicknesses starting at 3/8″, with compressive strengths from 10-50 psi.

November 7 2013 017

Target (6)

 

 

 

 

 

 

November 7 2013 028

November 7 2013 029

 

 

 

 

 

 

 

target (1)

Target (15)

Target (14)

 

 

 

 

 

 

 

 

View Project Profile (Pdf)

PROJECT DETAILS:

EPS vs. XPS

  • Both EPS and XPS are closed-cell insulations
  • EPS and XPS below grade insulations are covered under the same standard- ASTM C578
  • EPS has a more stable R-value and less long-term moisture retention than XPS
  • XPS is 20-40% more expensive for the same compressive strength

Cost Effective

  • Highest R-value per dollar
  • 100%, 20 year R-value warranty
  • 10-30% less than XPS insulations

Green From the Start

  • Up to 20 LEED points possible
  • 100% recyclable
  • contains up to 15% recycled content
  • Minimal job site waste
  • No thermal drift
  • Helps preserve energy and fossil fuels

R-Tech Uses

R-Tech has been used successfully for numerous commercial, industrial and residential applications:

  • Below grade insulation
  • Waterproofing protection board
  • Cavity walls
  • Interior walls
  • Cold storage & freezers
  • Sheathing
  • Concrete panel insulation
  • Concrete slabs
  • Radiant heated floors

PROJECT OR EPS QUESTIONS

Jason Myers

Jason Myers, Insulfoam Territory Sales Manager

Contact Jason Myers, Insulfoam Territory Sales Manager

Cell:  609-385-8930

Email:  Jason.Myers@insulfoam.com

Connect with Jason on LinkedIn  |  Follow Insulfoam on LinkedIn

 

0 Comments

Leave a reply

Your email address will not be published. Required fields are marked *

*